=encoding utf8 =head1 NAME Mojolicious::Guides::FAQ - Frequently Asked Questions =head1 OVERVIEW This document contains answers for the most frequently asked questions about L. =head1 QUESTIONS We hope these answers are to your satisfaction. =head2 How does Mojolicious compare to other Perl web frameworks? The short answer is "it doesn't", because we interpret the term "web framework" much more literally than others. With the emergence of the real-time web and new technologies such as WebSockets, we are facing new challenges that go way beyond what commonly used modules like L were designed for. Because of this, L contains a whole new HTTP client/server stack called L, which was heavily inspired by the original LWPng effort and carefully designed with these new requirements in mind. So while some of the higher abstraction layers might look similar to other web frameworks, it is more of a web toolkit and can even be used as the foundation for more advanced web frameworks. =head2 Why doesn't Mojolicious have any dependencies? We are optimizing L for user-friendliness and development speed, without compromises. While there are no rules in L that forbid dependencies, we do currently discourage adding non-optional ones in favor of a faster and more painless installation process. And we do in fact already use several optional CPAN modules such as L, L, L, L, L, L and L to provide advanced functionality if possible. =head2 Why reinvent wheels? Because we can make them rounder. Components specifically designed for user-friendliness and development speed are not easy to come by. We are strong believers of the Perl mantra "There is more than one way to do it", and our quest is to develop the best possible solutions for these two criteria. =head2 What about backwards compatibility? In conformance with L, we will always deprecate a feature for 3 months, before removing or changing it in incompatible ways between major releases. New features can however be marked as experimental to explicitly exclude them from these rules. This gives us the necessary freedom to ensure a healthy future for L. So, as long as you are not using anything marked experimental, untested or undocumented, you can always count on backwards compatibility, everything else would be considered a bug. However, to completely avoid any risk of accidental breakage, we do recommend following current best practices for version pinning with L for production setups. =head2 Why not split up Mojolicious into many smaller distributions? Because there are no advantages, it drastically increases maintenance costs and installation times without giving us anything in return. It would only make sense if we wanted to pass ownership of a module to a new maintainer, which we already have done in the past. =head2 Where can I discuss my patches for Mojolicious? We'd love to discuss your contributions to L on L. =head2 Which versions of Perl are supported by Mojolicious? First of all, you need to be aware that according to the L, only the two most recent stable release series of Perl are supported by the community and receive bug fixes, which are currently 5.32.x and 5.30.x. L follows this model and fully supports these two release series. In addition we will also keep the distribution installable (and that means passing all tests) up to a certain legacy version that the core team deems worthy of supporting, but not specifically optimize for it, this is currently 5.16.0. =head2 How well is Windows supported by Mojolicious? Windows is not officially supported by L, even though we try to keep the distribution installable. There may be serious security and/or reliability issues. Some of the more advanced features, such as L and the L web server, will also require the use of the L. =head2 Is Perl's taint mode supported by Mojolicious? No. There is no benefit at all to using taint mode. Modern Perl applications are much too complex to benefit from such a naive mechanism in any meaningful way. At best it would give you a false sense of security. =head2 Do I need to clean my environment before testing Mojolicious? L uses many environment variables both internally and externally, notably (but not exclusively) those starting with the prefix C and C. The test suite expects a clean environment; testing with a non-standard environment is unsupported and is unlikely to succeed. Therefore when installing or upgrading L and when running its tests, we highly recommend using an environment which does not set these variables. =head2 Where did my file extension go? Standard route placeholders will not match the C<.> character, however L routes automatically take file extensions like C<.html>, remove the leading C<.>, and store the result in the C stash value. This can be useful for URL-based content negotiation, such as automatically rendering different templates based on the file extension. See L for information on customizing format detection, or consider using L to allow matching of the C<.> character. =head2 Can I configure Hypnotoad from the command line? No, you can't, L is a bit special in this regard. Because when you initiate a zero downtime software upgrade (hot deployment), you are only really sending a C signal to the already running server, and no other information can be passed along. What you can do instead, is to use a L, L or L configuration file. # myapp.conf { hypnotoad => { listen => ['http://*:8080'], workers => 10 } }; Or if you don't actually need zero downtime software upgrades, just use L instead, which is otherwise almost identical to Hypnotoad. $ ./myapp.pl prefork -m production -l http://*:8080 -w 10 =head2 What does the error "...certificate verify failed" mean? There are many variations of this error, but most of them mean that TLS certificate verification in L failed. This usually happens for two reasons. The most common one is that the peer certificate is simply invalid. If that's the case and you are certain that no MITM attack is being attempted, you can use the attribute L or C environment variable to disable certificate verification. And if that's not the case you might be missing the L module, which is often required by L to be able to verify certificates. =head2 What does the error "Maximum message size exceeded" mean? To protect your applications from excessively large requests and responses, our HTTP parser has a cap after which it will automatically stop accepting new data, and in most cases force the connection to be closed. The limit is 16MiB for requests, and 2GiB for responses by default. You can use the attributes L and L to change these values. =head2 What does the error "Maximum start-line size exceeded" mean? This is a very similar protection mechanism to the one described in the previous answer, but a little more specific. It limits the maximum length of the start-line for HTTP requests and responses. The limit is 8KiB by default, you can use the attribute L or C environment variable to change this value. =head2 What does the error "Maximum header size exceeded" mean? Almost the same as the previous answer, but this protection mechanism limits the number and maximum length of HTTP request and response headers. The limits are 100 headers with 8KiB each by default, you can use the attributes L and L or the C and C environment variables to change these values. =head2 What does the error "Maximum buffer size exceeded" mean? This protection mechanism limits how much content the HTTP parser is allowed to buffer when parsing chunked, compressed and multipart messages. The limit is around 256KiB by default, you can use the attribute L or C environment variable to change this value. =head2 What does "Your secret passphrase needs to be changed" mean? L uses secret passphrases for security features such as signed cookies. It defaults to using L, which is not very secure, so we added this log message as a reminder. You can change the passphrase with the attribute L. Since some plugins also depend on it, you should try changing it as early as possible in your application. $app->secrets(['My very secret passphrase.']); =head2 What does "Nothing has been rendered, expecting delayed response" mean? L has been designed from the ground up for non-blocking I/O and event loops. So when a new request comes in and no response is generated right away, it will assume that this was intentional and return control to the web server, which can then handle other requests while waiting for events such as timers to finally generate a response. =head2 What does "Inactivity timeout" mean? To protect your applications from denial-of-service attacks, all connections have an inactivity timeout which limits how long a connection may be inactive before being closed automatically. It defaults to C<40> seconds for the user agent and C<30> seconds for all built-in web servers, and can be changed with the attributes L and L or the C environment variable. In L applications you can also use the helper L to change it on demand for each connection individually. This timeout always applies, so you might have to tweak it for applications that take a long time to process a request. =head2 What does "Premature connection close" mean? This error message is often related to the one above, and means that the web server closed the connection before the user agent could receive the whole response or that the user agent got destroyed, which forces all connections to be closed immediately. # The variable $ua goes out of scope and gets destroyed too early Mojo::IOLoop->timer(5 => sub { my $ua = Mojo::UserAgent->new; $ua->get('https://mojolicious.org' => sub ($ua, $tx) { say $tx->result->dom->at('title')->text; }); }); =head2 What does "Worker 31842 has no heartbeat (50 seconds), restarting" mean? As long as they are accepting new connections, worker processes of all built-in pre-forking web servers send heartbeat messages to the manager process at regular intervals, to signal that they are still responsive. A blocking operation such as an infinite loop in your application can prevent this, and will force the affected worker to be restarted after a timeout. This timeout defaults to C<50> seconds and can be extended with the attribute L if your application requires it. =head2 What does "Transaction already destroyed" mean? This error message usually appears after waiting for the results of a non-blocking operation for longer periods of time, because the underlying connection has been closed in the meantime and the value of the attribute L is no longer available. While there might not be a way to prevent the connection from getting closed, you can try to avoid this error message by keeping a reference to the transaction object that is not weakened. # Keep a strong reference to the transaction object my $tx = $c->render_later->tx; $c->ua->get_p('https://mojolicious.org')->then(sub { $c->render(text => 'Visited mojolicious.org'); })->catch(sub ($err) { $tx; $c->reply->exception($err); }); =head2 What does "Illegal character in prototype" mean? Mojolicious assumes L are enabled in documentation examples. If the signatures feature has not been enabled in that scope, they are interpreted as L, an unrelated parser feature. Mojolicious does not require signatures; if you don't want to or cannot use signatures (which require Perl 5.20+), you can translate most signatures into a standard subroutine parameter assignment. # With signatures feature get '/title' => sub ($c) { $c->ua->get('mojolicious.org' => sub ($ua, $tx) { $c->render(data => $tx->result->dom->at('title')->text); }); }; # Without signatures feature get '/title' => sub { my ($c) = @_; $c->ua->get('mojolicious.org' => sub { my ($ua, $tx) = @_; $c->render(data => $tx->result->dom->at('title')->text); }); }; =head1 MORE You can continue with L now or take a look at the L, which contains a lot more documentation and examples by many different authors. =head1 SUPPORT If you have any questions the documentation might not yet answer, don't hesitate to ask in the L, or on L. =cut